CP Standard Features Anti-Detonation Grooves: Are grooves that protect the top ring by disrupting detonation waves. Also know as contact reduction grooves, these grooves limit the piston/cylinder contact during high temperature and RPM. Accumulator Groove: Is a V shaped groove machined in the 2nd ring land to collect excess blow-by between the top and second ring. This groove collects residual gasses during combustion and alleviates top ring flutter while increasing ring seal. CP groove: stands for Constant Pressure Groove. This groove works as a channel on the lower part of the top land that equalizes pressure to the back of the top ring groove. When used in combination with lateral gas ports, the CP groove helps keep gas ports clear of carbon build up. In addition, the CP groove prevents the top land from smudging into the top ring if the land rubs the cylinder bore. Double Pin Oilers: in conjunction with their dual fed reservoir add twice the amount of oil from the cylinder wall to the wrist pin. Cam and Barrel: Extensive research and development has been done to find the optimum skirt shape for each piston. Having the correct cam and barrel on a part promotes the following: Tighter clearances, Less noise, Better ring seal, More power, Durability.
  • Bore (86.5mm);Size (+0.5mm);Compression Ratio (9.0)
  • New in box

CP Forged Pistons RB26DETT R32 R33 R34 Bore 86.5mm +0.5mm 9.0:1 CR SC7313

Write a Review

Free Shipping over $35 and Free Returns 

$5.30 off if you opt out of free returns