Rollover to Zoom 

|Share:

Description

Cylinder Head Performer Series RPM Cylinder Head Performer Series RPM Cylinder Head; Complete; 450-550hp; Std. Exh. Port; 72cc Chamber Vol.; 2.09 Intake/1.66 in. Exh. Valves; Single; SPECIFICATIONS: Cylinder Head Type: Standard Emission: Non-Emissions Engine Make/Size: Ford 390-428 Finish: Satin Preparation: Bolt On (Not Required) Type: Complete Usage: Street/Performance WARNING CA Proposition 65: No FEATURES: Out-of-the-Box Bolt-On Performance Cobra Jet-Sized Valves Create Excellent Flow Cylinder Head Specifications: Combustion chamber volume: 72cc / 76cc; Intake runner volume: 170cc; Exhaust runner volume: 125cc; Intake valve diameter: 2.09" Exhaust valve diameter: 1.66" Valve stem diameter: 3/8" Valve guides: Manganese bronze; Deck thickness: 5/8" Valve spring diameter: 1.55" Valve spring maximum lift: .600" Pushrod diameter: 3/8" Valve angle: 13 ; Exhaust port location: Stock; Spark plug fitment: 14mm x 3/4 reach, gasket seat. INSTALLATION NOTE: Match with Edelbrock head gasket sets. 76cc heads have vertical bolt pattern only, 390 GT exhaust will not fit. Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using. Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Deck thickness: 5/8". IMPORTANT NOTES: Direct bolt-on heads for 1961-76 390-427-428 Fords. 428 Cobra Jet-sized valves promote excellent flow for streetable power. #60089 can be machined to accept 2.19" intake and 1.73" exhaust valves. Rocker shaft stud kit #6009 provides better rocker shaft retention and is highly recommended for use with Edelbrock FE heads. It eliminates wearing of the threads and the possibility of bottoming the rocker shaft bolts in the head. Intake and exhaust CC values are projected if using Edelbrock valves, and equivalent valve job and bowl blend. Edelbrock FE heads do not have the bolt pattern to accommodate the s
  • 428 Cobra Jet Sized Valves Promote Excellent Flow For Streetable Power,These Heads Give Great Torque And Horsepower Up To 6500 RPM,Limited 1 Year Warranty
  • 60069
  • Edelbrock
Specifications
ColorPolished
YearUNIVERSAL 0 - 0 NON APPLICATION SPECIFIC
Dimensions26 x 11.2 x 8.5 inches

Edelbrock 60069 Performer Series RPM Cylinder Head
 by 

Edelbrock

Write a Review

Free Shipping over $35 and Free Returns 

$889.99
$707.50
$3.68 off if you opt out of free returns 
WARNING
CHOKING HAZARD Small parts. Not for children under 3 yrs.