Rollover to Zoom 

|Share:

Description

Stir stains well prior to use. GF DYE STAINS can be applied with foam brush, rag, pad applicator or spay. Apply a liberal amount of stain to ensure easy workability. Wipe off excess stain with clean paper towel or cloth. If applied by spray application you have of the option of spray no wipe. Lightly mist the stain on the wood until you achieve the desired color. Allow the stain to dry completely. A second coat of stain will darken the color. GF DYE STAINS can be inter-mixed with regular GF water based stains or GF DYE STAIN REDUCER to create your own custom colors. Light buffing of the stain is not recommended but optional. Be careful not to buff through the stain, particularly on the edges. Use a super fine sanding pad or #320 or higher grit sandpaper. TONING & SHADING Use GF DYE STAINS to add color to your clear finishes. Add 1-2 ounces GF DYE STAIN per quart of water based finish for toner. Spray or brush 1-2 coats of toner to build color. Finish with 1-2 coats of clear finish. Always test on sample piece to ensure color is correct. TOPCOATS All top coats (water based, shellac, lacquer, solvent based) are acceptable over GF DYE STAINS. DRY TIME: 2-4 hours under normal conditions (70F or 21C/70% humidity) Coverage: 75 sq. ft. per pint or 1.84 sq. m/liter WARNING: TEST FOR COMPATIBILITY WHEN USING THIS PRODUCT WITH PRODUCTS FROM OTHER BRANDS. General Finishes products should be tested to your complete satisfaction before using. General Finishes will not be responsible for any failure if our products are used in conjunction with other brands of finishes. We do not test General Finishes products with those of another manufacturer and will not accept liability if there is a compatibility issue.

    Specifications
    SizePint
    ColorVintage Cherry

    General Finishes Water Based Dye Stains (Pint

    Write a Review

    Free Shipping over $35 and Free Returns 

    $18.46
    $0.21 off if you opt out of free returns