Description

Norton NorZon Plus R823 durable, polyester-backed belts are suitable for use with stainless steel. The self-sharpening zirconia alumina cuts at a rapid rate, while the polyester backing is suitable for moderate- to heavy-pressure applications. The combination of zirconia alumina and polyester backing mean this belt performs well on hard metals like stainless steel.

Coated abrasives have individual abrasive grains spaced at a predetermined distance from one another. This is a closed-coat belt. A closed coat covers 100 percent of the surface with abrasive grains, for more stiffness and better surface finish than an equivalent open coat, where abrasive grit covers 50 to 70 percent of the surface. The cloth backing is stiffer, tougher, and thicker than a paper backing. Cloth resists tearing while bending and flexing during use. This belt features a resin bond. Resin bonds have good moisture resistance, are harder and less flexible than glue bonds, and have good heat resistance and grain retention. Resin bonds are useful for abrasive operations with high operating speeds, impact, and sudden loading, as the resin bond is strong.

Zirconia alumina is a self-sharpening abrasive that allows for a faster cut rate and longer life than aluminum oxide, due to its ability to fracture and refracture, creating new cutting edges. Zirconia alumina is often used for high stock removal on wood and metals.

Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish.

Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards.

  • Zirconia alumina is self-sharpening and durable, allowing for a faster cut rate than aluminum oxide
  • Heavy polyester backing is resistant to heat, durable, and flexible, for product consistency
  • Cloth backing is stiffer, tougher, and thicker than a paper backing
  • Use this belt for aggressive cut rate and longer life on stainless steel
  • Closed coat for a higher-quality finish than an open-coat belt
Specifications
Size4-1/2 inches
ColorGray

Norton BlueFire R823P Cloth Abrasive Belt, Waterproof, Polyester Backing, Zirconia Alumina, 25" Width, 60" Length, Grit 120 (Pack of 5)
 by 

Norton

Write a Review

Free Shipping over $35 and Free Returns 

$255.99
$0.74 off if you opt out of free returns