Normal AC Output Power: 540W
Maximum AC Output Power: 600W
AC Output Voltage Range: 90V ~ 130V
AC Output Frequency Range: 46Hz ~ 65Hz
Total Harmonic Distortion(THD): <5%
Power Factor: 0.99
DC Input Voltage Range: 10.8V ~ 30V
Peak Inverter Efficiency: 0.92
Standby Power consumption: <0.5W
Output Current Waveform: Pure Sine-wave
MPPT Function: Yes
Over Current Protection: Yes
Over Temperature Protection: Yes
Reverse Polarity Protection: Yes
Island Protection: Yes
The individual system of SGPV is that.
1. Installing the solar panel of the SGPV at a suitable location that sunshine can irradiate on it.
2. Connecting the cables of the solar panel to the DC input terminals of the small grid tie inverter of the SGPV, inserting the plug of the inverter into the socket of the home grid.
3. After this, when the sun shines, the SGPV will convert the solar energy to the home grid.
There are 4 LED indicators, 3 green indicators and 1 red indicator, 3 green LED indicators will start to cycle from left to
right when the grid and AC input supply is detected. This indicates the inverter is operating under normal condition.
The rate of the cycling is according to how much power is being output from the wind turbine. The bigger the output
power is, the faster the rate is."
If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called “Island Protection”
SGPV can be stackable, and all SGPVs are independent each other. The total power converting to the grid is the total
power of all SGPVs. The installation of each SGPV is same. Connecting large quantity of SGPV to the grid, this will
construct high-power grid-tie system
1 X Grid Tie Inverter
1 X Power Cord
1 X User Manual